Skip to main content

Wealthbox: Connect Your CRM, Import Households, and Send Notes and Tasks

Written by Taylor Stewart

What can I do with Wealthbox in Kerdora?

Wealthbox in Kerdora lets an advisor import or link households, review changes to household details, read CRM notes, and send eligible Kerdora notes and tasks. Start in Advisor Settings → Integrations.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

A Wealthbox connection doesn't import a complete financial plan or establish bank, custodian, or calendar feeds. Household details and CRM notes have separate review paths, and sending notes or tasks requires its own settings. Clients never see Wealthbox CRM notes in Kerdora; ordinary Kerdora notes still follow their own client-visibility choice.

How do I connect Wealthbox to Kerdora?

Connect Wealthbox from Advisor Settings → Integrations using your Wealthbox API token.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

  1. Open your account menu and choose Integrations. Under CRM, select Wealthbox's row or its Connect button, then Connect Wealthbox in the pop-up.

  2. Follow Kerdora's token instructions: in Wealthbox, go to Settings → API Access and create a token.

  3. Paste that token into Wealthbox API token and select Connect.

  4. On Send notes and tasks to Wealthbox?, turn on Send general notes to Wealthbox, Send tasks to Wealthbox, both, or neither. Each switch saves as you change it. This step explains that Kerdora sends with your personal token, which has full access to your Wealthbox account.

  5. Select Import clients to open Import from Wealthbox, or Not now to close that pop-up.

Practice setup’s Connect your tools step opens the same pop-up and token form.

Connecting doesn't itself send every existing note or task. Later, select Wealthbox's row in Advisor Settings → Integrations to open its drawer, where you can change sending choices or choose Import clients.

How do I import Wealthbox households without duplicating clients?

In Advisor Settings → Integrations, Wealthbox's drawer has Import clients, which opens Import from Wealthbox. There you can create new Kerdora clients or link existing ones.

  1. On your first visit, Import from Wealthbox reads your Wealthbox households on its own and shows progress. You can leave while it runs. Later, select Get latest from Wealthbox to pick up Wealthbox changes.

  2. Use the views, Search households, or the Everyone's / Assigned to me dropdown (shown when your Wealthbox has more than one user) to find households.

  3. Check each household's dropdown in the In Kerdora column: Create new client, Skip, or one of your clients under Your clients. Kerdora fills in a suggestion for you to change.

  4. Select Review and import N in the page header. It takes every household set to come in, whatever that list shows.

  5. On Review your import, check each linked household's people, then select Import N households.

A suggestion isn't a verified match. Prefer linking when a Wealthbox household already exists in Kerdora, and check names and people before confirming; Review your import marks a weak match with “Check this match”. Linking a Kerdora prospect or past client to a Wealthbox household makes it a Client.

Reading Wealthbox doesn't create client plans. Importing the reviewed households does. After it finishes, Go to clients opens your client list.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

Why isn't a Wealthbox household in Import from Wealthbox?

Import from Wealthbox includes active Household contacts with members when their contact types qualify for import. A household marked Client qualifies even if its members have other contact types; a household marked Prospect, Past Client, or another non-client type doesn't.

For a household without a contact type, Kerdora checks its members: it qualifies if nobody has a contact type or at least 1 member is marked Client. It stays out if every member who has a type is marked something other than Client.

A person outside any Wealthbox household appears only when active and marked Client. Organizations and trusts outside a household are left out.

If a household is missing, check its status, contact type, and members in Wealthbox, then select Get latest from Wealthbox in Import from Wealthbox. Wealthbox prospects and past clients aren't imported; only Slant import reads those stages. Kerdora doesn't read government ID numbers from Wealthbox.

What do Wealthbox's import filters and review choices mean?

On Import from Wealthbox, its views sort households by the choice in each one's In Kerdora column. Views and search only change what that list shows.

  • All shows every household for your pick in its user dropdown: Everyone's, Assigned to me, or one Wealthbox user. That dropdown shows when your Wealthbox has more than one user.

  • Ready shows households set to be created or linked, including suggestions.

  • Skipped shows households that won't come in. A household assigned to another Wealthbox user starts here.

  • Imported shows households already linked to Kerdora clients.

Select rows' checkboxes to choose Create N new clients, Skip, or Back to suggested for many at once.

On Review your import, households are grouped as Linked to existing clients and New clients. New clients show State and filing and To finish after import. Select a linked household's row to see its people.

Same as pairs a Wealthbox person with an existing Kerdora member. Add as a new person adds that person separately. Skip leaves a whole household out of this import, and Skip all leaves out a group.

Review these choices before selecting Import N households, especially when spouses or other family members have similar names.

What household information does Wealthbox import into Kerdora?

Wealthbox household import can add names, preferred names, birthdays, contact details, employment, addresses, and household members. On Review your import, check State and filing and any warnings for new households, and each linked household's people. Check member types in Profile → Household after import.

Kerdora maps Wealthbox household titles to member types:

  • Head, Spouse, and Partner become Clients.

  • Child and Grandchild become Children.

  • Parent, Grandparent, Sibling, and Other Dependent become Other adults, or Children if under 18.

  • A person without a household title normally becomes an Other adult, with a warning.

  • Contacts with a date of death aren't imported.

For a new household without a Head, Kerdora chooses a primary Client from Client-mapped people, or promotes an Other adult if none exist, using birthdays to put older people first. A plan has at most 2 Clients; extra Client-mapped people become Other adults, with a warning.

Proposed filing status is Married Filing Jointly only when a Head and a Spouse both become Clients; otherwise it's Single. State comes from that household's Wealthbox address. State and filing aren't editable on Review your import; correct them in Profile → Household after import.

A CRM import doesn't supply investment holdings, account balances, income amounts, insurance coverage, or a complete tax return. Gather financial facts through supported account links, document extraction, custodian imports, or manual entry.

How do I review later Wealthbox household changes?

For a linked household, Profile → Household → Check for changes compares Wealthbox details with Kerdora and lets an advisor choose what to update.

  1. Open Profile → Household and find Linked to Wealthbox.

  2. Select Check for changes.

  3. Review Updated in Wealthbox for source changes, Changed in both for fields edited in both systems, and New in Wealthbox for new people.

  4. Choose the fields and people to accept, then select the button showing the update count, such as Update 2 fields.

Updating changes Kerdora only; it doesn't send household-field edits back to Wealthbox. Keep Kerdora's, stop asking records your choice to retain Kerdora values for the reviewed differences.

No action needed explains differences that don't require an update. People removed from Wealthbox stay in Kerdora. If Wealthbox no longer lists a household as active, Kerdora reports that fact without deleting the client file.

If Kerdora says Wealthbox changed again while you were deciding, select Check again to see current values before applying updates.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

How do I send Kerdora notes to Wealthbox?

Turn on Send general notes to Wealthbox in Wealthbox's drawer in Advisor Settings → Integrations to send new eligible General notes for households linked to Wealthbox.

  1. Select Wealthbox's row in Integrations to open its drawer, then turn on Send general notes to Wealthbox.

  2. Confirm Turn on if Kerdora asks about your personal token.

  3. Enable Include notes visible to the client only if those Kerdora notes should also go to Wealthbox.

  4. Add a note for a linked household and check its sending status.

Notes created before sending was enabled don't automatically backfill. New notes wait until editing has paused for about 90 seconds before sending. Kerdora adds the note title, body, and a link back to Kerdora on the Wealthbox household contact.

If you make a sent note client-visible while Include notes visible to the client is off, Kerdora stops updating its Wealthbox copy, even though that note can still show In Wealthbox. That copy stays in Wealthbox as it was.

Sent notes are visible to Everyone in your Wealthbox workspace. Kerdora's client-visible choice doesn't restrict Wealthbox workspace access. Use Don't send before a note goes out, or Stop sending to stop later updates to a sent note; an existing Wealthbox copy remains.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

How do I send Kerdora tasks to Wealthbox?

Turn on Send tasks to Wealthbox in Wealthbox's drawer in Advisor Settings → Integrations to send new advisor-assigned tasks for households linked to Wealthbox.

  1. Enable Send tasks to Wealthbox and confirm Turn on if prompted.

  2. Create a task for a linked household and assign it to yourself as that household’s advisor.

  3. Open that task to check its Wealthbox status.

  4. If Wealthbox's drawer offers older open tasks, select Send them or Send it to queue those eligible tasks too.

Tasks assigned to household members aren't sent for the first time. A task already sent continues updating if later reassigned to a household member; its Wealthbox copy stays assigned to the connected advisor.

Kerdora sends task description, due date, and completion information. Kerdora edits update changed fields in Wealthbox. Wealthbox task edits don't automatically become Kerdora task edits, so don't rely on Wealthbox completion to close a Kerdora task.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

What do Wealthbox note and task sending messages mean?

A note or task's Wealthbox status in Kerdora tells you whether its CRM copy exists and whether an action is needed.

  • Sends to Wealthbox: an eligible item is waiting to send.

  • Sending to Wealthbox: sending is underway.

  • In Wealthbox: a copy has been sent; selecting this link opens its CRM household.

  • Won't go to Wealthbox: sending was excluded; Send reverses that choice.

  • Not updated in Wealthbox: a sent note's updates were stopped; Resume enables updates again.

  • Deleted in Wealthbox: a remote copy is gone; Send again requests another copy.

  • Couldn't send to Wealthbox: a send failed; Retry requests another attempt.

In Wealthbox's drawer, Sending to Wealthbox is paused for now means Kerdora has paused sending for every practice. You don’t need to repair anything. Eligible notes and tasks written meanwhile send after Kerdora resumes sending.

A failed-send count reports notes or tasks that weren't sent. Check connection health and item eligibility before retrying; a retry isn't a way to bypass disabled sending or an unlinked household.

Where can I read Wealthbox notes in Kerdora?

Office → Notes shows read-only Wealthbox notes for a linked household. Advisors can read these entries; clients never see Wealthbox CRM notes through Kerdora.

  1. Open a linked client's Office → Notes.

  2. Open its filter button and choose Wealthbox under Note type.

  3. Select a CRM note to read it. To edit its source, use Open household in Wealthbox and make changes there.

Kerdora reads Wealthbox whenever Office → Notes opens, using a read that can be up to 15 minutes old. A recently added or edited note may therefore take a few minutes to appear. If a read fails, a message below Office → Notes offers Retry, or Reconnect Wealthbox in Settings when access needs repair.

Kerdora reads notes on a Wealthbox household contact and up to 2 imported people. Notes filed only on another person's contact won't appear. Notes Kerdora already sent to Wealthbox are excluded from incoming CRM entries to avoid duplicate copies.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

Can Dora read Wealthbox notes and open tasks?

Yes. In an advisor's Dora conversation for a linked household, Dora can read Wealthbox notes and open Wealthbox tasks when a question needs them. These CRM records are read-only to Dora, and clients don't have Dora.

Ask about previous discussions or outstanding work for that household. Dora can't change Wealthbox source records through this lookup; edit those records in Wealthbox. Reading CRM records is separate from Kerdora's note and task sending switches in Wealthbox's drawer.

Dora needs your household's Wealthbox link and a usable connection. If access needs repair, use Reconnect on Wealthbox's row in Advisor Settings → Integrations before asking again.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

What happens when I delete a Kerdora note or task sent to Wealthbox?

Deleting a Kerdora note leaves its sent Wealthbox copy in place. Deleting a sent task can remove its Wealthbox copy, while a copy already completed in Wealthbox is kept.

The task deletion behavior requires an active connection with task sending enabled. Turning sending off stops future synchronization; it isn't a command to delete everything previously sent.

If you only want to stop a note's updates, use Stop sending on that note instead of deleting it. Resume can enable updates again. If a copy was deleted in Wealthbox, Kerdora doesn't automatically recreate it; Send again requests a new copy where that action is offered.

Check both applications before removing an item that serves as a client record. A deletion in Kerdora isn't a general-purpose cleanup of Wealthbox history.

What should I do if a Wealthbox import or connection fails?

Start in Advisor Settings → Integrations when Wealthbox shows Needs reconnecting, or check Import from Wealthbox when an import stops partway through.

  1. For Needs reconnecting, select Reconnect on Wealthbox's row or in its drawer, and paste a valid replacement Wealthbox token.

  2. If an initial book read failed, use Try again. If Kerdora says a read or import is already running, wait for that operation to finish.

  3. If Import from Wealthbox shows “The import stopped after X of Y households”, select Resume before you leave; Kerdora continues the saved import and skips completed households. If you left or reloaded and Resume isn't there, don't import those households again; contact Kerdora Support with the household names and import time.

  4. If Kerdora says households changed since your review, or a client is already linked to another household, review that household before importing again.

Token-format errors mean the pasted value doesn't look like a token; token-rejected errors mean Wealthbox didn't accept it. Don't send tokens to Support. Provide the exact message, affected household, and whether connecting, reading, importing, or sending failed.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

How do I disconnect Wealthbox from Kerdora?

Use Disconnect in Wealthbox's drawer in Advisor Settings → Integrations to stop your Wealthbox connection while keeping client plans already imported into Kerdora.

  1. Open Advisor Settings → Integrations and select Wealthbox's row to open its drawer.

  2. Select Disconnect at the top of that drawer. Disconnect Wealthbox? says what stops (notes and tasks going to Wealthbox) and what stays (clients already in Kerdora).

  3. Choose whether to check Also delete the households and people read from Wealthbox.

  4. Confirm Disconnect.

The optional deletion removes Kerdora's CRM import records and mappings. Clients already created or linked in Kerdora stay. It doesn't delete your Wealthbox book or retract notes and tasks already sent there.

After disconnecting, notes and tasks stop going to Wealthbox. If you only want to pause sending, turn off Send general notes to Wealthbox or Send tasks to Wealthbox instead.

If you checked that deletion box, CRM notes, Check for changes, and sending stay unavailable for formerly linked clients until you link them again. After reconnecting, open Import clients, pick each existing client in its household's dropdown, review its people, and confirm Import N households.

Wealthbox in Kerdora is in a pilot for selected practices. If Wealthbox isn't listed in Advisor Settings → Integrations, contact Kerdora Support to ask for access.

Did this answer your question?